Volume 4, Issue 2, December 2020, Page: 41-46
Weight Reduction of Engine Mounting Bracket
Atul Gaikwad, Production Engineering Department, Savitribai Phule Pune University, Pune, India
Ganesh Jadhav, Mechanical Engineering Department, D Y Patil Institute of Engineering, Management & Research, Savitribai Phule Pune University, Pune, India
Received: Jul. 8, 2019;       Accepted: Dec. 2, 2019;       Published: Sep. 19, 2020
DOI: 10.11648/j.ae.20200402.13      View  142      Downloads  51
Weight of an automobile and its parts are an important parameter regarding its performance and efficiency. As the weight of vehicle increases its fuel efficiency and performance decreases. To enhance the performance of an automobile, the automobile parts should be lighter in weight and also possess the required strength. So, Weight reduction of engine mounting brackets can be achieved by changing the material of brackets and also by optimizing the material removal for hole manufacturing on the brackets. Optimization of material removal rate is done by applying Taguchi method. Under this project, study of optimization of material removal rate will be done by using Taguchi method and signal-to-noise ratio graph will be obtained with the help of Minitab Software. In this automotive era the need for light weight structural materials is increasing as there is a more focus on fuel consumption reduction and improvement in decreasing the emission. The magnitude of production volumes has traditionally placed severe requirements on the robustness of process used in the manufacturing. The manufacturers have strong importance on the cost has the demand for the component to improve the material performance and to deliver these materials at low cost is the requirement. The result & conclusion will be drawn and suitable future scope will be suggested.
Engine Mounting Bracket, Taguchi, Minitab, Result
To cite this article
Atul Gaikwad, Ganesh Jadhav, Weight Reduction of Engine Mounting Bracket, Applied Engineering. Vol. 4, No. 2, 2020, pp. 41-46. doi: 10.11648/j.ae.20200402.13
Copyright © 2020 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
M. V. Aditya Nag 2012, Gokaraju Rangaraju Institute of Engg & Tech, HTC. Topology Optimization of Engine Mounting Bracket.
Wu, P., Ma, Q. H., Luo, Y. P. and Tao, C. (2016) Topology Optimization Design of Automotive Engine Bracket. Energy and Power Engineering, 8, 230-235.
Sahil Naghate and Sandeep Patil (2012), “Modal Analysis of Engine Mounting Bracket Using FEA”, International Journal of Engineering Research and Applications (IJERA), Vol. 2, 1973-1979.
Jasvir Singh Dhillon et al. (2014) Int. Journal of Engineering Research and Applications www.ijera.com ISSN: 2248-9622, Vol. 4, Issue 9 (Version 6), pp. 74-81 (3) (PDF) Design of Engine Mount Bracket for a FSAE Car Using Finite Element Analysis.
Xiao-Yong Pan and Doni Zonni (Tuopu Group), Guo-Zhong Chai (Zhejiang University of Technology), Yan-Qing Zhao and Cui-Cui Jiang (South China University of Technology): SAE International: 2007, Structural Optimization for Engine Mount Bracket.
Pramod Walunje and prof. V. K. Kurkute (Dec 2013) “Optimization of Engine Mounting Bracket Using FEA”, PARIPEX – International journal of research.
Chyn-Shu Deng, Jih-Hua Chin: Springer-Verlag London Limited 2004: Published online: 25 August 2004 Hole roundness in deep-hole drilling as analysed by Taguchi methods.
Sameer U. Kolte, Dvid Neihguk, and Abhinav Prasad, “Structural Durability Analysis of Powertrain Mounting Bracket”, excerpt from the Proceedings of the 1012 COMSOL conference in Bangalore.
Prof. D. S. Chavan, Prof. M. V. Kavade Mechanical Engg Dept. Rajarambapu Institute of Technology, Sakharale. Islampur, India. 2012, Static Structural and modal analysis of engine bracket using finite element analysis: Umesh S. Ghorpade, (International journal of engg research & technology (IJERT) Vol 1 Issue 10.
Umesh Ghorpade, D. S. Chavan, Vinaay Patil and Mahendra Gaikwad, 2012 “Finite Element Analysis and Natural Frequency Optimization of Engine Bracket”, International Journal of Mechanical and Industrial Engineering (IJMIE) ISSN No. 2231-6477, Vol-2, Issue 3.
Effect of muffler mounting bracket designs on durability: Senthilnathan Subbiah, O. P. Singh, Srikanth K. Mohan, Arockia P. Jeyaraj, TVS motor company ltd. Research & development, Hosur, Tamilnadu, India. (Engineering Failure Analysis 2011).
Browse journals by subject